EMS World Magazine is the most authoritative source in the world for clinical and educational material designed to improve the delivery of prehospital emergency medical care.
Issue link: https://emsworld.epubxp.com/i/110985
POLICY: Exempt from key safety requirements and often poorly laid out, ambulances are relatively unsafe places to work and travel. "I think all providers want to be seated and restrained, but there are things they feel they can't do from that position, such as CPR and intubation," says Jennifer Marshall of NIST's Law Enforcement Standards Office, the project's manager. "We've been working to find a solution to that, but it's a challenging area." An initial conceptualization displayed at last year's EMS World Expo featured twin attendant work stations on either side of the cot, with seats that swiveled 90 degrees to reach the patient and a sliding airway seat at the head. That's since been refined, and work is ongoing; a newer version is coming this month, and comments are still welcome. What NIST, NIOSH and their partners come up with should work its way into the first revision of the NFPA 1917 standard for automotive ambulances, scheduled for 2015. A guidebook of best practices collected from the NIST research will precede it in 2014. The NFPA NFPA 1917 functionally replaces the familiar GSA Triple-K purchasing spec. It incorporates elements of that and the Ambulance Manufacturers Division's manufacturing standards, which describe tests for various components. It is not a safety standard (ambulances are largely exempt from the Federal Motor Vehicle Safety Standards), but a design standard intended to provide a single threshold to which ambulances can be commonly built. A fair amount of debate has accompanied 1917. Some industry leaders have questioned the cost and feasibility of building to it, and the National Association of State EMS Officials lodged a pair of requests for tentative interim amendments (TIAs) to modify it, including one for deletion of a controversial 77-mph speed limiter. That change is expected to be approved this month. NASEMSO is forming a work group to offer comment during the 1917 revision process and has launched its own Model Rules for Ambulance Vehicle Design project to develop model ambulancedesign regulatory language for states (see 42 MARCH 2013 | EMSWORLD.com sidebar). It also successfully lobbied the GSA to delay retirement of the Triple-K from 2013 until 2015. Charleston County (SC) EMS director Don Lundy articulated some specific concerns at last year's EMS World Expo, including attachment of restraints and stretcher mounts to wood instead of metal and retention of the side-facing squad bench, a danger in frontal collisions. More generally, the EMS Safety Foundation has urged greater collaboration with automotive and technical experts and that occupant injury and fatality data better inform the standards-setting process. None of this is to say NFPA 1917 is without merit. It's a significant step forward from the Triple-K, and the STRATEGY: Federal bodies, private entities and others are working to develop better standards for ambulances and their components to improve outcomes in crashes. industry can utilize the NFPA's regular revision process to change, supplement and strengthen any weaker parts of the document as it matures. "We tried to create a baseline that brought together the best practices in the community today," says Green, a member of the 1917 technical committee. "The NFPA is very aware of what's going on at DHS, NIOSH, NIST and within the ambulance manufacturing community. So it has already placed the standard back in the revision cycle, trying to pick up that research to improve the standard. There are also mechanisms in place to discuss and potentially change individual elements. There are a couple of changes to the existing standard already in place. But on the whole I think it's a good standard and good starting point for the community." Other Players • A third standard in play is ASTM's F2020-02a, which defines standard practices for designing, building and procuring EMS ambulances. It is produced by a technical committee on emergency medical services and reflects many aspects of the Triple-K. • AMD's manufacturing standards 001–025 are fully incorporated into the Triple-K specs, and partially into NFPA 1917 and ASTM F2020. They include static tests of such things as ambulance body structure, and litter and O2 tank retention. • ANSI/ASSE Z15.1 is a standard from the American Society of Safety Engineers aimed at safer fleet operations. Among its requirements are written policies and accountability mechanisms, a driver selection/assessment program, training and reporting of incidents, trends and safety performance. • The BSI Group's ISO 39001 spells out requirements for road traffic safety management systems. • The Society of Automotive Engineers provides recommended practices for testing restraint and equipment mounts in frontal (SAE J2917) and side-impact (SAE J2956) collisions. • The EMS Safety Subcommittee within the Transportation Research Board's Transportation Safety Management Committee held its most recent meeting in January. The subcommittee, ANB 10(5), promotes information exchange between disciplines and integration of interdisciplinary expertise into ambulance construction and design. Its work is extensively chronicled at www. objectivesafety.net. The Future We're still without key crashworthiness and occupant protection requirements, and the standards we do have are stronger in some parts than others. Improving them is a long-term process. The good news is that safety is at the forefront of considerations like never before, and a lot of smart, motivated people—in the public and private spheres, and including manufacturers, consultants and others across the spectrum—are laboring toward the same end. "The goal is to provide the worker in the back of the ambulance with the same VISION: Ambulances that are more safely constructed, more efciently laid out, and encompass proven safety measures will better protect providers.